Français
Русский язык
日本語
Español
English
ATEX Broadcasting Telephones,Analog Explosion-proof Telephones with Sounder & Beacon JREX101-HB
JREX101-HB:
- Analog model
- SIP/VoIP model
Product Features
Model：JREX101-HB
Size：302 *240 *129(mm)
Material：GAluminum alloy
ATEX Broadcasting Telephones,Analog Explosion-proof Telephones with Sounder & Beacon
The VoIP Explosion Proof Telephone is designed for voice communication in the hostile environment where reliability, efficiency and safety are of prime importance. The telephone can handle the large temperature differences found outdoors, high humidity, exposure to sea water and dust,Corrosive atmosphere,Explosive gases & particles,as well as mechanical wear and tear, making it perfect for use as an emergency telephone.
This product has the following explosion protection:
II 2G Ex e ib [ib] mb IIC T4 Gb
III 2D Ex ib [ib] tb IIIC T135 °
-40 °C ≤ Ta ≤ +60 °C/+40°C
Zone 1, 2, 22
Application:
Ideal for Marine, Mining, Oil&Gas,Tunnels, Steel Plant,Drilling platform,Chemical plant,Power plant and related industrial application, etc.
Key Features for ATEX Telephone,Analog/SIP Explosion-proof Telephones for Zone1 & 2 Hazardous Area
Corrosion resistant aluminum alloy die casting housing, available in four colors, with NPT conduit entries and Type 3 / IP67 environmental ratings
Certificated for use in Hazardous areas of Gas Group IIB/IIA
Zone classification: Zone 1& Zone 2
Ex ’d’ protected
Intrinsically safe Ex”ib” certified
Temperature classification:T6
SIP or H323 protocols(Compatible with all PBX’S)
Power supply: Power over Ethernet
Fully configurable through any internet browser or the on-board display
Handset with Noise canceling microphone,for effective communication from noisy areas(Armored SS cord stands up to rough treatment,optional for black curly cord )
Completely programmable weatherproof keypad designed to be used with gloves
No.of keys(TOTAL 15KEYS):0-9,*,#,Redial,Mute,Last Number Redial
Hermetically sealed non-contact hook sensing switch improves system reliability
Built-in External Ringer that provides penetrating calling signal(85dbA@ 1meter)
Mounting :Wall/column/structural
Captive cover screws prevent loss during installation
Technical Date:
Analogue Version | ||
| Power Supply | From the analogue telephone network | |
| Supply Voltage | 24 VDC to 65 VDC | |
| Supply Current | 20 mA DC to 100 mA DC | |
| Ringer Volume | - 80dB(A) at a distance of 1 m - 110dB(A) at a distance of 1 m (for external horn speaker) | |
| Dialing Method | DTMF mode in accordance with ITU-T recommendation Q.23. | |
SIP Version | ||
| Power Supply | PoE or 12V DC | |
| Power Consumption | -Idle:1.5W -Active:1.8W | |
| SIP Protocol | SIP 2.0 (RFC3261) | |
| Support Codec | G.711 A/U, G.722 8000/16000, G.723, G.729 | |
| Communication Type | Full duplex | |
| Ringer volume | - 90~95dB(A) at a distance of 1 m - 110dB(A) at a distance of 1 m (for external horn speaker) | |
Ambient conditions | ||
| Protection type | IP 66 as per EN60529 | |
| Operating temperature | -25°C to +70°C | |
| Storage temperature | -25°C to +85°C | |
Package & Dimension:
Phone size: 204*334*126 (mm)
Carton size: 200*300*440 (mm)
Packaging materials: pearl cotton, carton
Gross weight: 7 KG
Net weight: 6 KG
Company information:
(All of our phone model avaliable for Analogue version,IP/SIP versio,GSM/3G version)
After well study your information,we sincerely hope to enter into partnership with your esteemed compnay.and we hope to serve you and cooperate with you for all of our product range in your market.
We could offer you all of our product range with ODM&OEM solution to meet your demands and requirement well.
and we will support you with the best product solution and costeffective solution to support you with the project requirement and marketing proposal.